產品詳情：
1、優質鋼材焊接，閘式刀架、強度高、剛性好、精度高 ；
2、焊后消除內應力,機身整體加工，保證了加工精度；
3、本機床設有前后擋料。后擋料采用變頻調速電機驅動，數字顯示數值。設計新穎，調節方便可靠。前擋料采用標尺計數。
4、上刀架的行程量可進行無級調節，以提高剪切下料時的行程次數。
5、機器剪切刃口處裝有安全防護柵欄，確保操作安全。
6、刃口間隙調節迅速、方便、并有刻度指示。
7、采用先進的液壓集成閥塊。結構緊湊，減少管路連接，提高了系統的可靠性與易維修性。

技術參數：

QC11Y Series Hydraulic guillotine beam shearing machine
Specification	Shearing thickness (mm)	Shearing width （mm）	Strokes mm-1	Backguage range (mm)	Shearing angler (°)	Workbench height （mm）	Main power （kw）
QC11Y/K -6*2500	6	2500	10-35	20-600	1°30′	800	7.5
QC11Y/K -6*3200	6	3200	8-35	20-600	1°30′	800	7.5
QC11Y/K -6*4000	6	4000	7-35	20-600	1°30′	800	7.5
QC11Y/K -6*5000	6	5000	6-25	20-800	1°30′	900	11
QC11Y/K -6*6000	6	6000	5-25	20-800	1°30′	1000	11
QC11Y/K -8*2500	8	2500	10-35	20-600	1°30′	800	7.5
QC11Y/K -8*3200	8	3200	8-35	20-600	1°30′	900	7.5
QC11Y/K -8*4000	8	4000	7-35	20-600	1°30′	1000	15
QC11Y/K -8*5000	8	5000	6-25	20-800	0.5-2°	1050	15
QC11Y/K -8*6000	8	6000	5-25	20-800	0.5-2°	840	15
QC11Y/K -12*2500	12	2500	10-35	20-800	0.5-2.5°	900	15
QC11Y/K -12*3200	12	3200	6-20	20-800	0.5-2.5°	940	15
QC11Y/K -12*4000	12	4000	6-20	20-800	0.5-2.5°	1000	15
QC11Y/K -12*5000	12	5000	5-15	20-800	0.5-2.5°	1060	30
QC11Y/K -12*6000	12	6000	6-15	20-800	0.5-2.5°	840	18.5
QC11Y/K -16*3200	16	3200	7-30	20-800	2°30′	900	30
QC11Y/K -16*4000	16	4000	6-30	20-800	2°30′	950	30
QC11Y/K -16*5000	16	5000	6-15	20-800	2°30′	1100	30
QC11Y/K -16*6000	16	6000	5-15	20-800	0.5-2.5°	1100	37
QC11Y/K -20*2500	20	2500	9-30	20-1000	0.5-2.5°	900	30
QC11Y/K -20*3200	20	3200	7-30	20-1000	0.5-3°	950	30
QC11Y/K -20*4000	20	4000	6-30	20-1000	0.5-3°	1100	30
QC11Y/K -20*5000	20	5000	5-30	20-1000	0.5-3°	1100	37
QC11Y/K -20*6000	20	6000	5-15	20-1000	3°	1200	45
QC11Y/K -25*2500	25	2500	5-25	20-1000	3°	900	37
QC11Y/K -25*3200	25	3200	4-25	20-1000	0.5-3.5°	950	37
QC11Y/K -25*4000	25	4000	3-20	20-1000	0.5-3.5°	1100	37
QC11Y/K -32*2500	32	2500	4-12	20-1000	0.5-3.5°	1000	55
QC11Y/K -32*3200	32	3200	4-12	20-1000	0.5-3.5°	1100	55
QC11Y/K -40*2500	40	2500	3-10	20-1000	0.5-3.5°	1200	60
QC11Y/K -40*3200	40	3200	3-10	20-1000	0.5-4°	1200	60
Because in the continuous improvement of products, if there is difference between this date and technical data, should comply with the technical agreement parameters on both sides. No further notice!